Valves, Drains & Upgrades
Shower and Tub Plumbing in Englewood, FL
Drips, temperature swings, slow drains and corroded outdoor showers fixed at the valve, plus the plumbing side of safer walk-in showers and tub replacements.
- 24/7 Emergency Service
- License CFC1431820
- Free Phone Estimates
- Veteran-Owned · Bonded & Insured
Inside and out
Shower and tub plumbing in Englewood, FL, from the bathroom to the backyard
Most shower complaints are valve complaints. In Englewood, plenty of them are outdoors.
A worn cartridge causes drips and sudden temperature swings, and a failed valve body can leak inside the wall for months before a stain appears on the other side. Good shower and tub plumbing in Englewood, FL finds the fault at the valve, the supply or the drain without opening more tile than necessary.
Then there are outdoor showers. Rinsing off sand after a day on Manasota Key or a boat ride on Lemon Bay is part of life here, and those showers sit in salt air, sun and grit every day. Metal valves corrode, supply lines crack and the hidden section behind the wall is often where the real leak is. We rebuild them with coastal-grade parts and a proper shut-off.
Bathrooms are also changing as homeowners plan to stay put. Walk-in showers, grab-bar-friendly layouts and anti-scald valves make the room safer, and we handle the plumbing side of those projects.
Our work
Shower and bathtub services
Valve repair and replacement
Cartridges rebuilt or replaced to stop drips, and failed valve bodies swapped behind the wall.
Outdoor shower rebuilds
Corroded valves, heads and supply lines replaced with brass or stainless parts and an indoor shut-off.
Walk-in conversions
Tub-to-shower plumbing with the drain relocated and a thermostatic or pressure-balancing valve fitted.
Slow drains
Hair and soap cleared, and older tub drains repaired when the trap or shoe has corroded.
Hidden leak tracing
Pan, valve and drain leaks located before any tile comes off, using our Englewood leak detection tools.
Warning signs
Signs your shower or tub plumbing needs work
- Water temperature jumps when someone flushes or runs a tap
- The spout or head keeps dripping after the handle is off
- Loose or cracked tiles or soft grout around the tub
- A stain on the ceiling or wall next to the bathroom
- An outdoor shower that leaks from the wall or the valve
- A drain that stays slow even after you clear the hair
The visit
How we handle a shower or tub call
Describe the symptom
Drip, temperature swing, slow drain or leak. Each points to a different part of the system.
Find the source
We check the valve, supply and drain with as little demolition as possible.
Approve the price
You receive a written price for the repair or upgrade before we start.
Repair and test
We fix it, run the shower and tub, check for leaks and leave the bathroom clean.
From the blog
Helpful plumbing guides
Revamping Home Comfort: How to Plan a Shower and Bathtub Installation
A new shower or tub is a plumbing project first and a design project second. Here is how to plan a shower and bathtub installation that works for years.
Read articleShower and Tub Plumbing Problems in Bradenton, FL: A Troubleshooting Guide
Drips, weak spray, sudden cold bursts and slow drains: a symptom-by-symptom guide to shower and tub plumbing problems in Bradenton homes and what fixes them.
Read article
Englewood questions
Shower and Tub Plumbing in Englewood: common questions
My outdoor shower keeps corroding. Is there a longer-lasting fix?
Yes. Replace plated or low-grade metal parts with solid brass or stainless valves and heads, use PEX or protected supply lines, and add a shut-off inside the house so the outdoor line can be isolated. That combination stands up to salt air far better and makes winter or seasonal shut-down easy.
What valve should I choose for a walk-in shower?
A thermostatic or pressure-balancing valve. Both limit sudden temperature changes when another fixture is used, which helps prevent scalding and slips. Thermostatic valves hold a set temperature most precisely. We fit the valve at a comfortable height during a tub-to-shower conversion.
Why does my shower go cold when someone flushes the toilet?
Your valve is not compensating for the pressure drop. Older two-handle valves and worn pressure-balancing cartridges are common culprits. A new cartridge sometimes fixes it; otherwise, replacing the valve solves it for good. Our shower and bathtub service page explains the options.
Can you replace a tub without redoing the whole bathroom?
Often, yes. It depends on how the tub was installed and what surrounds it. We look at access, the drain connection and the valve, then tell you what is involved and price it in writing before any work.
Have another question? Browse our plumbing FAQ or call (941) 541-7473.
Shower or tub trouble in Englewood?
Call (941) 541-7473. Tell us what the fixture is doing and we will give you a free phone estimate.
Request Your Plumbing Service
Share a few details and we’ll reach out to schedule your appointment. For emergencies, please call.
Redemption Plumbing Services · 2908 Florida Blvd, Bradenton, FL 34207 · Mon–Fri 8AM–5PM · Sat 8AM–12PM · 24/7 emergency