Valves, Drains & Conversions
Shower & Tub Plumbing in Largo, FL
Drips, scalding swings, weak flow, slow drains and walk-in conversions handled at the valve and drain, without tearing out tile unless it is truly necessary.
- 24/7 Emergency Service
- License CFC1431820
- Free Phone Estimates
- Veteran-Owned · Bonded & Insured
Behind the tile
Shower and tub plumbing in Largo, FL, fixed at the source
Almost every shower complaint traces back to one of four things: the valve, the supply, the drain or the seal around them.
Good shower and tub plumbing in Largo, FL means diagnosing which of those has failed before anything is opened. A drip after shut-off usually means a worn cartridge. A temperature jump when someone flushes points to an older valve without pressure balancing. Weak flow at the shower only often comes from scale in the valve or a narrowed supply behind it.
Plenty of Largo bathrooms are still original to the house, with galvanized supply pipe and the first tub drain ever installed. If we are opening the wall to replace a valve anyway, that is the right moment to replace the old pipe feeding it, so the new valve gets full pressure.
In condos, a leaking shower pan or tub overflow can show up as a stain on the ceiling below. We find the source quickly so the damage does not spread.
What we fix
Shower and bathtub services
Valve repair and replacement
Cartridges rebuilt, or the valve replaced with a pressure-balancing model that stops scalding swings.
Slow tub and shower drains
Hair and soap buildup cleared, and old drain shoes and overflows replaced when they leak.
Tub-to-shower conversions
Drains and valves relocated for a walk-in shower, roughed in to code before tile goes up.
Hidden leak tracing
Pan, valve and drain leaks found before tile is removed. For leaks elsewhere, see leak detection in Largo.
Pressure problems
Weak shower flow traced to scaled valves, clogged heads or narrowed supply pipe.
Signs to watch
When the shower or tub needs a plumber
- The shower head or tub spout drips after it is turned off
- Water temperature jumps when another fixture is used
- The drain stays slow even after you clear the hair
- Grout or tiles near the valve are loose, cracked or stained
- A ceiling stain appears below the bathroom
- The handle is stiff or turns too far
Repair vs upgrade
Rebuild the valve or replace it?
Cartridge rebuild
- Valve body is sound and parts are available
- Fixes most drips and stiff handles
- Usually done through the trim opening
- No tile work needed
Full valve replacement
- Old valve with no pressure balancing
- Parts obsolete or the body is corroded
- Good time to replace galvanized supply too
- Often part of a remodel or conversion
From the blog
Helpful plumbing guides
Revamping Home Comfort: How to Plan a Shower and Bathtub Installation
A new shower or tub is a plumbing project first and a design project second. Here is how to plan a shower and bathtub installation that works for years.
Read articleShower and Tub Plumbing Problems in Bradenton, FL: A Troubleshooting Guide
Drips, weak spray, sudden cold bursts and slow drains: a symptom-by-symptom guide to shower and tub plumbing problems in Bradenton homes and what fixes them.
Read article
Largo questions
Shower & Tub Plumbing in Largo: common questions
Why does my shower go cold or hot when someone flushes?
Older shower valves do not balance pressure. When a toilet refills, it pulls cold water away from the shower and the mix suddenly turns hot. A modern pressure-balancing valve corrects that automatically. In many cases we can replace the valve through an access panel or with minimal tile work.
Can a bathtub be converted to a walk-in shower?
Usually, yes. The tub drain needs to be relocated and resized for a shower, and the valve is often raised and replaced. We rough in the drain and valve to code so your tile installer works over plumbing you can trust. Our shower and bathtub plumbing services page has more on conversions.
Can you fix a leaking shower valve without removing tile?
In many cases, yes. Most valves can be serviced from the front through the trim opening or from an access panel on the other side of the wall. We only open tile when there is no other way to reach the problem, and we tell you before we do.
What does shower or tub repair cost?
A cartridge replacement costs far less than replacing a valve behind the wall or installing a new tub. We diagnose first and give you a written price before work begins, with no hidden fees.
Why is the water pressure weak at my shower but fine at the sink?
When only the shower is weak, the cause is usually local: a scaled shower head, a clogged valve cartridge or screen, or a short run of old galvanized pipe feeding that bathroom. Soaking the head in vinegar is a good first test. If that does not help, the valve or supply needs a look.
Have another question? Browse our plumbing FAQ or call (941) 541-7473.
Shower or tub giving you trouble?
Tell us whether it drips, swings in temperature, drains slowly or leaks. We will explain the likely cause and give you a free phone estimate.
Request Your Plumbing Service
Share a few details and we’ll reach out to schedule your appointment. For emergencies, please call.
Redemption Plumbing Services · 2908 Florida Blvd, Bradenton, FL 34207 · Mon–Fri 8AM–5PM · Sat 8AM–12PM · 24/7 emergency