
Find It First, Then Fix It
Leak Detection & Repair in Riverview, FL
A rising water bill, a warm spot on the floor or a damp baseboard: we locate the leak precisely before opening a wall, floor or yard.
- 24/7 Emergency Service
- License CFC1431820
- Free Phone Estimates
- Veteran-Owned · Bonded & Insured
Hidden water
Why leak detection in Riverview starts with the meter, not a hammer
The cheapest repair is the one where only a small, accurate opening is made.
Professional leak detection in Riverview, FL is mostly about narrowing down. Is the water escaping from the house supply, the irrigation system, a toilet, or a line under the slab? Each answer leads to a different repair, and guessing wrong means tearing out drywall or tile for nothing.
Newer Riverview homes are plumbed with PEX and PVC, which do not corrode the way older metal pipe does. They can still fail, though. Crimp rings that were not fully seated, fittings stressed during construction, and nails or screws driven through a wall into a line are all leaks we track down regularly.
Older properties closer to the river present different problems, from aging fittings to long yard lines. Whatever the home, we use non-invasive detection first and only open what needs to be opened.

Do this first
A simple meter test you can run tonight
Before you call, this ten-minute check tells both of us a lot.
- Turn off every faucet, appliance and the irrigation controller
- Make sure no toilet is refilling
- Find your water meter and note the reading or the small leak indicator
- Wait at least fifteen minutes without using any water
- Check whether the reading or indicator has moved
- If it moved, close the main shut-off and see whether movement stops
Our method
How we pinpoint a leak
Isolate the system
Meter and pressure tests separate the house supply, irrigation and individual fixtures so we know which line is losing water.
Listen and scan
Acoustic equipment picks up the sound of water escaping inside walls and under concrete, and we trace it to a specific spot.
Confirm before opening
We mark the location and explain the repair and the price so you approve it first.
Repair and retest
After the fix, the system is pressure tested again so you know the leak is gone, not just moved.
Where it is
Inside the house or out in the yard?
Signs it is indoors
- Warm or damp spots on a tile or concrete floor
- Staining or bubbling paint low on a wall
- The sound of running water with everything off
- Musty smell inside a closet or cabinet
Signs it is outdoors
- A patch of lawn that stays soggy in dry weather
- Water bubbling near the meter box
- Meter keeps moving after the house shut-off is closed
- One irrigation zone that stays greener than the rest
After we find it
What the repair usually looks like
A leak at a fixture or inside a wall is typically a small opening, a new fitting and a patch. If the leak is under the concrete, we talk through the options covered on our slab leak repair page for Riverview, including rerouting the line overhead instead of breaking up the floor.
If testing shows more than one weak point in the same run of pipe, we will tell you. Sometimes replacing a section is smarter than chasing leaks one at a time, and our pipe repair team in Riverview can quote both so you can compare.
From the blog
Helpful plumbing guides

Slab Leak Warning Signs: Does My Bradenton, FL Home Have a Slab Leak?
A warm floor, a spinning water meter or a sound of running water with every tap off can all point to a hidden leak. The slab leak warning signs Bradenton homeowners should know.
Read article
How Fast Does Mold Grow From a Water Leak in Bradenton, FL?
In Bradenton's warm, humid air, mold can take hold within a day or two of a leak. Here is the timeline, the warning signs, and what to do first.
Read article
How to Tell If You Have a Hidden Water Leak: 6 Step-by-Step Tests
Suspect a leak but cannot see water? These six tests use your meter, toilets and valves to confirm a hidden leak and narrow down where it is.
Read article
Riverview questions
Leak Detection & Repair in Riverview: common questions
Can PEX pipe really leak in a brand-new Riverview home?
Yes. PEX itself holds up well, but the fittings and crimp rings that join it depend on correct installation. A ring that was not fully crimped, a line stressed during framing, or a fastener driven into a wall can all cause leaks in the first few years. These are often slow and hidden, so they show up first on the water bill.
How can I tell if the leak is my irrigation system?
Shut off the irrigation at its own valve or controller and run the meter test again. If the meter stops moving, the leak is likely in the sprinkler system. If it still moves, the house side is losing water. We can test both and point you in the right direction even when the problem is outdoors.
Will you have to tear out my floors to find the leak?
Not to find it. Our detection is done with meters, pressure testing and listening equipment, without opening anything. Once the spot is confirmed, a repair may need a small opening at that exact location, and we explain that before any work starts so you can approve the approach.
Have another question? Browse our plumbing FAQ or call (941) 541-7473.
Think you have a hidden leak in Riverview?
Run the meter test, then call us with what you saw. We will give you a free phone estimate and explain the next step.
Request Your Plumbing Service
Share a few details and we’ll reach out to schedule your appointment. For emergencies, please call.
Redemption Plumbing Services · 2908 Florida Blvd, Bradenton, FL 34207 · Mon–Fri 8AM–5PM · Sat 8AM–12PM · 24/7 emergency
